Call +82-31-1577 - 8898

Clean Air Tech

Search

Sitemap

Air pollution measurement agency

Introduction

Clean Air Tech's atmospheric self-measurement and environmental licensing,
One-stop environmental services are provided to the Hazard Prevention Plan.

Clean Air Tech is an official registration company for air environment construction and measurement agencies,
and has completed the training of the Korea Occupational Safety and Health Agency.
Having specialized technical personnel, the administrative affairs of documents in the Environmental Authorization and Hazard Prevention Plan and the measurement and management of air pollutants in the discharge facilities are performed. It is an atmospheric environment comprehensive solution company with both qualifications and requirements to act on behalf of the company.

Clean air conservation act Article 39
While a business entity operates emission facilities, he/she shall perform a self-measurement of pollutants emitted or have a measuring agent perform a measurement, and record the results
Hazard prevention about national health
and environment /
Managing and preserving the atmospheric environment in a proper and sustainable manner
Clean air conservation act Article 40
A business entity shall appoint an environmental engineer for the normal operation and management of emission facilities and prevention facilities.
Act on special measures for the deregulation of corporate
activities Article 40
A business operator may entrust duties of any of the following persons to a management agency

Process of work

  • 01.

    Requesting quotation

  • 02.

    Sending the estimate

  • 03.

    Requesting test analysis

  • 04.

    Checking schedule for sampling

  • 05.

    Sampling and applying

  • 06.

    Test analysis

  • 07.

    Depositing commission for measurement and analysis

  • 08.

    Sending test report

Frequency for self measurement by the type of outlet

  • 배출구별 자가측정 횟수

    +
    Type of outlet Amount of emission In case the measurement results are not automatically transmitted to the control center. When the measurement results are automatically sent to the control center,
    but the chimney automatic measuring instrument is not installed
    When measuring only the rear end When measuring the front and rear ends together
    Type 1 outlet Outlets with a total annual generation of dust, sulfur oxides and nitrogen oxides of 80 tons or more More than once a week More than once every 2 weeks More than once a month
    Type 2 outlet Outlets with a total of 20 to 80 tons of dust, sulfur oxides and nitrogen oxides generated annually More than 2 times a month More than once a month More than once every 2 months
    Type 3 outlet Outlets with a total of 10 tons or less and less than 20 tons of dust, sulfur oxides, and nitrogen oxides generated annually More than once every 2 months More than once every 2 months More than once every quarter
    Type 4 outlet Outlets with a total of 2 to 10 tons of dust, sulfur oxides and nitrogen oxides generated annually More than once every half year More than once every half year More than once every half year
    Type 5 outlet Outlets with a total annual production of dust, sulfur oxides and nitrogen oxides of less than 2 tons More than once every half year More than once every half year More than once every half year

Standard cost for air pollution measurement agency

It is appraised cost announced by National self measurement association in Oct 2015.
The table in below is the cost calculated by environmental testing and inspection act article 16 (5). The commission for business trip is different by the location.

  • Standard cost for each measuring air pollution

    +
    Number Pollutant Unit Standard cost
    1 Dust for each pollutant \ 175,200
    2 Exhaust gas \ 13,700
    3 SOx \ 47,600
    4 NH3 \ 48,600
    5 CS2 \ 49,700
    6 H2S \ 52,900
    7 CO \ 24,200
    8 NOX \ 46,900
    9 HCL \ 47,600
    10 THC \ 76,900
    11 Commission for business trip \ Standard : 139,000