Product Introduction

A downdraft dust collector specialized for removing fume generated in large quantities during plasma & laser processing of steel, stainless steel, etc., with an air pulse cleaning system.

Specifications and Standards

Appearance

Product Specifications

Product Specifications

Model Name	Air Volume (CMM)	Static Pressure (mmAq)	Power (Kw)	Specifications				Filter
				Width(A)	Depth(B)	Height(C)	Inlet(D)	Q’ty	Filtration Speed	Filtration Area
CAPH-1000	80	300	7.5	1350	1000	2710	Ø300	16	0.83	96
CAPH-1500	100	300	11	1350	1040	2930	Ø350	16	1.04	96
CAPH-2000	160	300	15	2018	1090	2820	Ø400	24	1.11	144

※ The heights mentioned in the table exclude the height of the wheels.
※ Specifications may change for performance improvement.

Key Features

• Dust collector specialized for plasma & laser fume removal

  • Designed with a low filtration speed (0.8~1 m/min) to increase filtration efficiency for plasma & laser fume and to extend the life of the filter.
  • Constructed with a fire prevention structure that extinguishes flames internally to prevent fires caused by high heat and sparks.
  • Main components susceptible to contamination are externalized to reduce malfunctions.

  

• Downdraft Dust Collector

  • A downdraft type of dust collector with horizontally mounted filters, where the contaminants are sucked from top to bottom.
  • The downdraft structure prevents the re-entrainment of settled particles by upward airflow and enhances filter life by preventing reattachment of particles to the filter surface during air pulsing (cleaning the filter with compressed air).

  

• Dust collector equipped with ultra nano filters developed
  with proprietary patent technology

  • Equipped with ultra nano filters coated with nano fibers on the filter surface.
  • Very high filtration efficiency (99.1%@0.3μm) allows for effective removal of fine dust and fume.
  • Approximately twice the lifespan compared to commonly used polyester material filters.
  • Developed and produced with our patent technology, making it more affordable than imported filters.

  
  

  • Standard P&E filter: Less than 2 years lifespan
  • Membrane filter: Less than 3 years lifespan
  • Ultra nano filter: Less than 4 years lifespan

• Air Pulse Jet Cleaning Method

  • Cleans the filter using an air pulse device (spraying compressed air from the air tank at set intervals).
  • Allows for filter cleaning even during operation of the dust collector. (Continuous operation 24/7)
  • Particles dislodged during cleaning are collected in the dust bin at the bottom.
  • Filters can be individually replaced without tools by simply loosening a knob, which is convenient.

  

• One-Touch Detachable Dust Bin

  • Designed for easy emptying of dust with a one-touch detachable dust bin.
  • Features a viewing window to check the level of accumulated dust and wheels for easy mobility when emptying the dust bin.
  • The increased distance between the filter and dust bin reduces the re-entrainment of particles during air pulsing, thereby extending the life of the filter.

  

• German-made Analog Differential Pressure Gauge

  • Equipped with an analog differential pressure gauge from AFRISO, a world-renowned German measuring device manufacturer, ensuring low malfunction rates and precise measurements.
  • The differential pressure gauge indicates the clogging level of the filter to signal the replacement time.

  

• Control Box / Distribution Board

  • Incorporates switches, circuit breakers, and control devices in a separate sheet metal box.
  • Electrical control devices are protected from contaminants, extending their lifespan.
  • Can be attached at a location of your choice.

  

Options (Optional)

• Local Switch, Contact Configuration

  • Adds a local switch for ON/OFF power control.
  • Can be attached at a desired location.
  • Electrical circuit contacts can be configured to operate ON/OFF simultaneously with other equipment.

  

• Flexible Conduit for Wires

  • Prevents fire by covering wires with a flexible conduit to protect the insulation from damage.

  

• Power Specification Change

  • Options available: 220V/ 380V/ 440V, single-phase/three-phase, 50Hz/60Hz.

Precautions

• • An air compressor is required since the filter is cleaned using compressed air.
  • Please inquire separately for adhesive fume such as film cutting fume, soldering fume containing flux, and fume generated from heating silicon material in ovens.