You cannot see this page without javascript.

skip navigator

집진기

Model

CACW 200 ~ 1000

Paint Spray Remover

  • Filter Andrean Filter, Pre-filter, Medium Filter, Carbon Mat Filter
  • Cleaning Filter Replacement Type
  • Purpose Removes Paint Spray Particles and Organic Compounds

Product Introduction

It is a specialized dust collector for removing particles and Volatile Organic Compounds (VOCs) dispersed during paint coating and painting work.

Specifications and Standards

Appearance

Product Specifications

Product Specifications
Model Name Air Volume
(CMM)
Static Pressure
(mmAq)
Output
(Kw)
Specifications Workbench (Hood)
Width(A) Depth(B) Height(C) Exhaust Port Width(B) Width Height(D)
CACW-200 25 230 1.5 770 650 1270 Ø200 650 500 650
CACW-300 40 230 2.2 930 800 1750 Ø250 900 600 830
CACW-500 60 230 3.7 930 800 1820 Ø300 1100 700 930
CACW-750 80 250 5.5 1400 900 1760 Ø350 1500 800 1130
CACW-1000 100 250 7.5 1400 900 1850 Ø400 1700 800 1230
※ The heights listed in the table exclude the height of the wheels.
※ These specifications may change for performance improvement.
 

Key Features

  • Paint Coating Dust Collector

    • A paint coating specialized dust collector with an integrated workbench hood that can use a spray gun.
    • Simple piping work is required to connect the duct to the exhaust port, so the exhaust air goes outside.
  • 5-Stage Filter Structure

    • The 5-stage filter structure enhances the removal efficiency of particles and VOCs, extending the life of the filter.
    • The filters are designed to be processed in the order of ①Andreae Filter ②Pre Filter ③Pre Filter (Frame Type) ④Medium Filter ⑤Carbon Mat Filter to maximize filter performance.
  • 1st Stage: Andreae Filter

    • The Andreae Filter attached to the workbench directly blocks a large amount of paint spray particles, extending the life of subsequent filters.
  • 2nd Stage: Pre Filter

    • A pre filter is additionally installed on the workbench to extend the life of the high-performance filter installed downstream.
    • The polyester material pre filter secondarily removes large particles.
  • 3rd Stage: Pre Filter (Frame Type)

    • The pre filter installed in the dust collector further removes large particles.
  • 4th Stage: Medium Filter

    • Particles not filtered by the pre filter are removed.
    • The medium filter can select filtering efficiency from 65% to 95% depending on the MEDIA, providing a medium to high performance filter that meets various filtering needs.
  • 5th Stage: Carbon Mat Filter

    • Particles and VOCs passed through the pre and medium filters are finally removed by the carbon mat filter.
    • The carbon mat filter uses the adsorption of activated carbon to remove odors.
  • High-Efficiency Turbofan

    • Uses a durable, high-efficiency turbofan to deliver stable and superior suction power.
    • The impeller is processed with ultra-precision electronic balancing to minimize vibration and noise.

Options (Selectable)

  • Control Box / Distribution Board

    • Switches, circuit breakers, and control devices are organized in a separate steel plate box.
    • The electrical control devices are protected from pollutants, extending their lifespan.
    • Can be mounted at a location of your choice.
  • Local Switch, Contact Configuration

    • Adds a local switch for ON/OFF power control.
    • Can be mounted at a location of your choice.
    • Electrical circuit contacts can be configured for simultaneous ON/OFF with other equipment.
  • Flexible Conduit for Wires

    • Covers wires with flexible conduit to prevent fire caused by insulation damage.
  • Filter Material Change

    • Depending on the nature of the pollutants, the filter material can be changed and applied.
    • HEPA (High Efficiency Particulate Air) filter: A high-performance filter that can remove particles of 0.3μm or larger at an efficiency of 99.97% or more.
    • MEDIUM filter: With MEDIA selection, filtering efficiency from 65% to 95% can be chosen, catering to various filtering demands with a medium to high performance filter.
  • Customization / Custom Design

    • On request, design changes or new developments other than standard products are possible.
    • Our company possesses the industry's highest level of design responsiveness.
  • Power Specification Changes

    • Options include 220V/ 380V/ 440V, single-phase/three-phase, 50Hz /60Hz.

Precautions

    • When discharging atmospheric pollutants, it is necessary to use the Adsorption Tower SAC-Series if a permit or authorization for the emission facility is required.

Please contact us
if you have any questions or need a quotation.

Clean Air Tech is a dust collector specialist certified by South Korea's Ministry of Environment.

Clean Air Tech is the leading

dust collectorspecialist in South Korea by sales.