Product Introduction

A dust collector integrated with cyclone and blower, effectively removing large and heavy particles generated in bulk through centrifugal force and gravitational settling. This dust collector is widely used in operations such as woodworking and stone processing due to its simple structure, low frequency of breakdowns, and cost-effective performance.

Specifications and Standards

Appearance

Product Specifications

Product Specifications

Model	Air Volume (CMM)	Static Pressure (mmAq)	Output (Kw)	Inlet	Outlet
CCD-300	40	160	2.2	Ø200	Ø200

※ Specifications are subject to change for performance improvement.

Product Standards

Product Standards

Category	Standards						Dust Box Capacity (ℓ)	Weight (kg)
	A	B	C	D	E	F
CCD-300 100L Type	2462	2177	800	400	500	740	100	120
CCD-300 200L Type	2970	2685	1308	830	527	800	200	140
CCD-300 1000L Type	3125	2840	1463	1000	1000	1140	1000	170

Key Features

• Utilizing the principles of centrifugal force and gravitational settling

  • Removes dust by using the principles of centrifugal force and gravitational settling.
  • Structural method of dust removal prevents decrease in suction power due to filter clogging.
  • Especially effective for operations where large and heavy particles like wood dust and metal dust are generated in bulk.
  • The unique rocket-shaped design provides a stable center of gravity, preventing easy tipping.
  • The cyclone is made of 1.6T thickness steel, making it sturdy.
  • Simple structure leads to fewer malfunctions, easy maintenance, and good performance relative to cost.
  • Relatively low pressure loss allows for stable operation over long periods.
  • Not significantly affected by the temperature of the incoming air.

  

• High-efficiency turbofan

  • Employs a durable, high-efficiency turbofan to deliver stable and excellent suction power.
  • Impeller undergoes precision electronic balancing to minimize vibration and noise.
  • The protruding motor at the top is waterproof (IP rating: 44).

  

• Large capacity dust box

  • Dust settled by centrifugal force is collected in the large capacity dust box below.
  • The amount of dust accumulated in the dust box can be visually checked.
  • The dust box is detachable from the main body, allowing for convenient dust disposal.

  

• Control box / distribution board

  • Electrical and control devices are provided in a separate control box / distribution board.
  • Electrical control devices are not affected by contaminants, extending their lifespan.
  • Incorporates an overload protection device that cuts power to the motor in case of overload, preventing fires.
  • Can be attached at the desired location.

  

Options (Selectable)

• Dust box capacity change

  • The capacity of the dust box can be selected from 100 liters, 200 liters, or 1000 liters.

  

• After filter / bracket

  • An internal catchment type cartridge filter made of polyester can be additionally installed to increase filtration efficiency.
  • A separate catch bag, dust box, or vinyl must be installed after the after filter.
  • Brackets for mounting the after filter to the wall are available.

  

• Flexible conduit for wiring

  • A flexible conduit is used to cover the wiring, preventing fire due to insulation damage.

  

• Power specification changes

  • Options include 220V/ 380V/ 440V, single phase/three phase, 50Hz/60Hz.

Precautions

• • For safety, the bottom must be anchored to the floor.
  • Not suitable for small and light fine dust particles.