Model
CEP 30 ~ 100
Two-stage Charged Electrostatic Precipitator
- Filter Demister, Ionizer, Cell
- Cleaning Washable, Semi-permanent Use Possible
- Purpose Oil Mist, Haze and Smoke Removal
Product Introduction
This is a two-stage charging electrostatic precipitator that removes particles using electrostatic forces. It can remove oil mist, fume, and smoke with high filtration efficiency.
Specifications and Standards
Appearance
Product Specifications
| Model Name | Air Volume (CMM) |
Static Pressure (mmAq) |
Output (Kw) |
Dimensions | |||
|---|---|---|---|---|---|---|---|
| Width(A) | Depth(B) | Height(C) | Inlet(D) | ||||
| CEP-30 | 34(Max) | 68(Max) | 0.27 | 795 | 490 | 600 | 150 |
| CEP-30D | 34(Max) | 68(Max) | 0.27 | 1460 | 1175 | 600 | 150 |
| CEP-30SR | 17(Max) | 285(Max) | 0.2 | 1085 | 490 | 600 | 150 |
| CEP-30D-SR | 37(Max) | 305(Max) | 0.2 | 1750 | 490 | 600 | 150 |
| CEP-50D | 75.5(Max) | 36(Max) | 0.75 | 2020 | 950 | 600 | 250 |
| CEP-100D | 114(Max) | 59(Max) | 22 | 2380 | 950 | 1178 | 350 |
※ Specifications are subject to change for performance improvement.
Key Features
-
Electrostatic Precipitator
- It uses electrostatic forces to attach particles from pollutants to the collection cell, achieving very high dust collection efficiency, capable of removing 95~98% of particles as small as 0.01㎛.
- The frequency of trips (shutdowns) due to contamination of the collection cell and the rate of efficiency decrease are low.
- Trips do not occur even if moisture enters the collection cell.
- It uses a low-noise blower, resulting in low noise and power consumption.
-
First Stage: Demister
- A demister is installed to increase the filtration efficiency of the collection cell located downstream.
- The demister spreads particles by inertia and gravitational settling.
-
Second Stage: Ionizer
- The ionizer ionizes particles positively, making them electromagnetic.
-
Third Stage: Collection Cell
- Particles that are electromagnetic get attached to the collection cell and removed by electrostatic forces.
Options (Optional)
-
Control Box / Distribution Board
- Switches and circuit breakers, control devices are assembled in a separate sheet metal box.
- The electrical control devices are not affected by pollutants, extending their lifespan.
- It can be attached and used at the desired location.
-
Local Switch, Contact Configuration
- A local switch for turning the power ON/OFF is added.
- It can be attached and used at the desired location.
- The electrical circuit's contacts can be configured to turn ON/OFF simultaneously with other equipment.
-
Carbon Mat Filter
- You can add a carbon mat filter.
- The carbon mat filter uses the adsorption properties of activated carbon to remove odors from gases.
-
Flexible Conduit for Wiring
- A flexible conduit is applied over the wiring to prevent fire due to insulation damage.
-
Customization / Custom Design
- Upon request, it is possible to modify the design or develop new products beyond standard specifications.
- We possess the highest level of design responsiveness in the industry.
-
Power Specification Change
- You can choose from 220V/ 380V/ 440V, single-phase/three-phase, 50Hz /60Hz.
Precautions
-
- Do not inhale flammable substances such as gasoline or thinner.
- For high-temperature oil mist, please inquire separately.