You cannot see this page without javascript.

skip navigator

집진기

Model

CEP 30 ~ 100

Two-stage Charged Electrostatic Precipitator

  • Filter Demister, Ionizer, Cell
  • Cleaning Washable, Semi-permanent Use Possible
  • Purpose Oil Mist, Haze and Smoke Removal

Product Introduction

This is a two-stage charging electrostatic precipitator that removes particles using electrostatic forces. It can remove oil mist, fume, and smoke with high filtration efficiency.

Specifications and Standards

Appearance

Product Specifications

Product Specifications
Model Name Air Volume
(CMM)
Static Pressure
(mmAq)
Output
(Kw)
Dimensions
Width(A) Depth(B) Height(C) Inlet(D)
CEP-30 34(Max) 68(Max) 0.27 795 490 600 150
CEP-30D 34(Max) 68(Max) 0.27 1460 1175 600 150
CEP-30SR 17(Max) 285(Max) 0.2 1085 490 600 150
CEP-30D-SR 37(Max) 305(Max) 0.2 1750 490 600 150
CEP-50D 75.5(Max) 36(Max) 0.75 2020 950 600 250
CEP-100D 114(Max) 59(Max) 22 2380 950 1178 350
※ The height mentioned in the table excludes the height of the wheels.
※ Specifications are subject to change for performance improvement.
 

Key Features

  • Electrostatic Precipitator

    • It uses electrostatic forces to attach particles from pollutants to the collection cell, achieving very high dust collection efficiency, capable of removing 95~98% of particles as small as 0.01㎛.
    • The frequency of trips (shutdowns) due to contamination of the collection cell and the rate of efficiency decrease are low.
    • Trips do not occur even if moisture enters the collection cell.
    • It uses a low-noise blower, resulting in low noise and power consumption.
  • First Stage: Demister

    • A demister is installed to increase the filtration efficiency of the collection cell located downstream.
    • The demister spreads particles by inertia and gravitational settling.
  • Second Stage: Ionizer

    • The ionizer ionizes particles positively, making them electromagnetic.
  • Third Stage: Collection Cell

    • Particles that are electromagnetic get attached to the collection cell and removed by electrostatic forces.

Options (Optional)

  • Control Box / Distribution Board

    • Switches and circuit breakers, control devices are assembled in a separate sheet metal box.
    • The electrical control devices are not affected by pollutants, extending their lifespan.
    • It can be attached and used at the desired location.
  • Local Switch, Contact Configuration

    • A local switch for turning the power ON/OFF is added.
    • It can be attached and used at the desired location.
    • The electrical circuit's contacts can be configured to turn ON/OFF simultaneously with other equipment.
  • Carbon Mat Filter

    • You can add a carbon mat filter.
    • The carbon mat filter uses the adsorption properties of activated carbon to remove odors from gases.
  • Flexible Conduit for Wiring

    • A flexible conduit is applied over the wiring to prevent fire due to insulation damage.
  • Customization / Custom Design

    • Upon request, it is possible to modify the design or develop new products beyond standard specifications.
    • We possess the highest level of design responsiveness in the industry.
  • Power Specification Change

    • You can choose from 220V/ 380V/ 440V, single-phase/three-phase, 50Hz /60Hz.

Precautions

    • Do not inhale flammable substances such as gasoline or thinner.
    • For high-temperature oil mist, please inquire separately.

Please contact us
if you have any questions or need a quotation.

Clean Air Tech is a dust collector specialist certified by South Korea's Ministry of Environment.

Clean Air Tech is the leading

dust collectorspecialist in South Korea by sales.